Plastic pall ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 Degree C to 150 Degree C. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc..
Physical & Chemical properties of plastic tower packing
|
Performance / Material |
PE |
PP |
RPP |
PVC |
CPVC |
PVDF |
|
Density (kg/m3) |
0.94-0.96 |
0.89-0.91 |
0.93-0.94 |
1.32-1.44 |
1.50-1.54 |
1.75-1.78 |
|
Operation Temp.(Degree C) |
90 |
>100 |
>120 |
>60 |
>90 |
>150 |
|
Chemical corrosion resistance |
Good |
Good |
Good |
Good |
Good |
Good |
|
Compression Strength(Mpa) |
>6.0 |
>6.5 |
>7.0 |
>6.0 |
>8.0 |
>10.0 |
Technical Data
Sizes (mm) Surface (m2/m3 ) Free Vol. (%) Number per m3 Weight (kg/ m3) 16*16*1 260 91 230000 141 25*25*1.2 210 90 53500 82 38*38*1.4 140 89 13500 54 50*50*1.5 100 90 6500 51 76*76*2.6 73 92 1930 58
Note: Other size can be customized.
